The tour began at Devore, CA at about 8:30 am after meeting a friend, who ended up being the only person to show. After a quick briefing on what we were to see, we headed south to Verdemont, where we inspected a freeway overpass that had remained mostly intact from its original 1950’s construction. The bridge rail and approach guard rail was original and relatively untouched. From there, we headed back to Cajon Blvd and viewed the old concrete alignment at Verdemont.

After Verdemont, we headed back to Devore to see a section of intact 1916 paving, which acts partly as a driveway for an antenna site. The paving, oil macadam, is quite rare to see these days and was pretty cool to see. Despite all it has gone through, the paving was fairly smooth with only a few major potholes. The roadway damage did also offer an opportunity to more closely inspect the paving itself. The aggregate that was used was fairly large by modern standards and appeared to be granite.

North on Cajon Blvd, we passed a couple of C-monuments adjacent to the freeway. I first spotted these on a trip a few months ago following the Blue Cut fire. It was nice to see they were still there. Those monuments were also at the point where old Cajon Blvd merges with the “new” Cajon Blvd (the extension from Devore on a new alignment).

Our next stop was at Blue Cut. There, we checked out a plaque commemorating the history of the Blue Cut area. Blue Cut, as it was noted on the plaque, was the location of a toll booth on the original wagon road through here. We also inspected the foundations of the 1940’s weigh station, which was removed not long after the freeway bypassed this section. While we were at Blue Cut, we also watched three trains pass by, one of which was a “fast freight”, which was passing another train.

Moving north from Blue Cut, we stopped briefly at the Debris Cone Creek bridge, then headed toward Cajon Junction. At Cajon Junction, we followed the eastern frontage road south to the end of the road. There, we found the trail monument from 1917, which was placed alongside the roadway just after it was paved. The monument itself was moved to its present location when the freeway was built. This location was also the divergence of the original path through Cajon Pass and the later roads, which eventually became US 66. As it was getting a bit hot, we moved onto our next stop – Cajon Summit.

Between Cajon Junction and Cajon Summit, the old roadway has been greatly modified. Only portions of both directions of the former expressway are still visible. The whole section, however, has been closed since the Blue Cut fire burned the area. This same fire, unfortunately, also took what would have been our lunch stop – the Summit Inn Café. The sign still remains, but the whole business is gone. It may be rebuilt, but only time will tell. So far, the site has only been cleared.

After stopping at the summit, it was time to work our way back down the hill. Instead of taking the freeway back to Devore, we decided it best to take the old highway once again. This time, we made an additional stop at a bridge near Swarthout Canyon Road. This stop proved to be quite interesting as we found the foundations for an old structure that was alongside the 1916 roadway. We figured the old building may have been a gas station or some other roadside service building. We also saw two more trains pass by while we were there.

We headed back to Devore to finish up the tour. By then, we were quite hungry, so we decided to have a late breakfast at Tony’s Diner. The food was decent and the location was nice. It was good to be in a nice air-conditioned building as well. Overall, the tour was a lot of fun, even though it wasn’t well attended. Next time will be better and hopefully be cooler.